|
||||||
| |||||||
|
|
|||||||
 |
      |
Wireless Modems
Ethernet Radio
902-928 MHz 900 MHz 2.4-2.4835 GHz 2.4 GHz 2.4-2.4835 GHz Smart Spectrum FAQ
See also
Tech Services: Installation:
Antenna |
SRM6330 Hybrid Ethernet-Serial Modem—
|
||||||
|
Data-Linc Group's SRM6330 license-free wirelss hybrid, Ethernet-serial modem for the 2.4 GHz ISM band |
Features
|
Data-Linc Group’s SRM6330 wireless Ethernet-serial modem is the next version of the successful SRM 2.4 GHz wireless modems. The SRM6330 offers backward compatibility with both the SRM6100/SRM6130 and the SRM6300E/SRM6310E/SRM6320 models. The SRM6330 offers Ethernet to serial, EtherNet/IP to DF1 and modbus TCP/IP to modbus RTU connectivity for hybrid integration of serial and Ethernet devices. Only one modem is re- quired for this integration which reduces cost and increases efficiency. The accompanying, SetLincTM software makes SRM6330 configuration easy and intuitive.
The SRM6330 is feature rich, adding cutting- edge auxiliary microprocessor to add a broad range of enhanced, user-friendly features and capabilities.
Modem setup and configuration have been simplified by Data-Linc’s proprietary SetLinc software. Configuration via the Ethernet or the serial port (RS232) provides versatility. To further simplify installation and increase user confidence, the SRM6330 is “ping-able.” Radio network communication can be readily deter- mined by pinging the Master or the Remote— an invaluable troubleshooting feature for deter- mining if the communication link is functioning.
Additional advantages of the SRM6330 include Ethernet bridging and 10/100 auto-MDIX Ethernet port. The radio network forms an Ethernet bridge between Master radio Ether- net devices and one or more Remote radio Ethernet devices.
Like the prior SRM Family 2.4 GHz mo- dems, the 10+ miles (16 km)* range offers superior reliability and performance in the license-free band. The SRM6330 utilizes the same high performance, ultra-reliable Smart SpectrumTM technology that ensures exceptional data integrity— even in high noise environments. It continues the SRM Family tradition of allowing each modem to be configured for Master, Remote, Repeater or Repeater/Remote mode. The SRM6330’s compact design with optional DIN rail clip, allows easy mounting. The front panel power and data connectors give the user immedi- ate connectivity and front-located LED status lights provide direct visual access to critical diagnostic information.
Field proven performance ~ Industrial grade support
*Greater range in optimal conditions with clear line-of-sight, Repeaters and/or higher gain antennas.
Download a printable pdf (573K) version of this SRM6330 Hybrid Ethernet-Serial Modem data sheet. To read pdf files you need to get Adobe Acrobat Reader and install it on your PC.^ Top of Page ^
Included
CD. SetLincTM configuration software, LincViewTM OPC RF network management software, documentation
Antenna. Test antenna
Cable. CAT5 (7')
Power. Wall mount supply 115-230 VAC input, 12 VDC output
Quick Start Guide
Operating Modes
Point-to-point and multipoint mode
Master, Repeater, Remote or Repeater/Remote
Interface
Ethernet.
One 10/100baseT Auto-MDIX
Serial-Linc port— RS232/RS485.
Serial configuration
Serial data tunneling via UDP or TCP/IP
Direct serial mode
Diagnostics port. RS232
Operating ranges
System gain. 129 dB
Distance. 10 miles (16 km) with omni antennas (with line-of sight)
Transmitter
RF Output Power. 500 mW maximum, (27 1dB steps)
Modulation. Frequency Hopping Spread Spectrum, GFSK
RF Data Rate. 115.2Kbps - 144 Kbps
Hop Patterns. 15 (user selectable)
Occupied Bandwidth. 230 KHz
Error Correction. 32 bit CRC
RF Encryption. Substitution Dynamic Key, 256 bit AES
Receiver
Sensitivity. -102 dBm @ 10-4 raw BER
Selectivity. 20 dB @ fc ±345 KHz
Maximum data throughput. 115Kbps point-to-point mode
assuming 75% frequency availability
Antenna Interface
Standard. SMA connector
Optional. External omni directional or yagi
FCC power limit. 4 Watts EIRP (36dB) max at antenna
Impedance. 50 Ohms
^ Top of Page ^
Configuration
SetLincTM software or web browser
DC Power Requirements
8 Watts transmit peak
2 Watts receiving
10 to 28 VDC via 3-pin pluggable terminal block
Diagnostics
Front panel LEDs. Power, RF Carrier, RF Out, RF In,
LAN (Link-Act), Moe LEDs x 4
LincViewTM OPC. Diagnostic software for real-time RF network
monitoring; via Ethernet (UDP) or serial Diagnostic port
Operating Environment
Temperature. -40° to
Humidity. 0-95% non-condensing
Enclosure
Standard. NEMA 1, 18 gauge steel; 2.35 X 3.75 X 8.1 in.
(6 X 9.5 X 20.6 cm) using mounting brackets
Optional. 2.35 X 3.76 X 6.3 in. (6 X 9.5 X 16 cm) using
DIN rail mounting
Weight
1.8 lb (0.82 kg)
Enclosure Dimensions Diagram
|
||||||||||||||||||||||||||||||||||||||
| 120611 | ||||||||||||||||||||||||||||||||||||||
