|
|
|
Innovative, Not Your Standard I/O
 Data-Linc’s wireless “CIX” Communication Interface Extender System (900 MHz and 2.4 GHz versions) provides a cost effective, easy-to-implement, industrial grade I/O extender that directly connects a PLC’s communication ports (serial or Ethernet) to I/O points without complicated PLC programming or proprietary software. With a ratio of up to 16 Remotes for each Master, a full network provides a total of 384 I/O points. Each CIX6x00/R Remote provides 8 discrete inputs, 8 discrete outputs, four analog inputs and four analog outputs (12 bit analog resolution). It is compatible with LincView OPC, Data-Linc’s powerful, proprietary RF network diagnostic and management software. Read the press release and see the data sheet.
NET620 Serial to Ethernet Bridge
Data-Linc's latest product, the NET620, offers simple low cost bridging of serial and Ethernet devices. Each NET620 supports DF1 to Ethernet/IP, modbus RTU to modbus TCP/IP and serial binary to UDP or TCP/IP (terminal server). Setup to operational solution is fast and easy. (See the detailed data sheet and read the press release)
PLR580 I/O Extenders save thousands of dollars
 Problem: A client needed to get three 4-20 ma signals and four digital inputs from a tank farm to their control room PLC, in order to read the level of the tanks. They also needed to send three analog and four digital output signals back to the tank farm to control tank levels. The distance from the control room to the pumping station was 4000 feet. To further complicate matters, 10 years earlier the customer had added a new facility with a parking lot that was constructed between the tank farm and the control room. Because they did not want to mix the analog and 120 volt signals in one conduit, they were considering trenching through the concrete parking lot to run cable tray or two underground conduits to the tank farm. Trenching would cost an estimate of between $13,000 and $15,000 for material and labor. Click here for the solution.
Hybrid is not just for cars
Data-Linc Ggroup introduces hybrid serial-Ethernet mode ms for Instrumentation and Industrial Automation environments. The 900 MHz SRM6220 and the 2.4 GHz SRM6320 modems feature Ethernet with serial tunneling that allows the user to connect to serial and/or Ethernet devices without requiring side by side networks or Ethernet-serial converters. Read the press release or get detailed information from the data sheets for the SRM6220 and the SRM6320.
Data-Linc Group now offers customers hybrid serial-Ethernet modems for Instrumentation and Industrial Automation environments. The 900 MHz SRM6220 and the 2.4 GHz SRM6320 modems feature Ethernet with serial tunneling that allows the user to connect to serial and/or Ethernet devices without requiring side by side networks or Ethernet-serial converters. Read the press release or get detailed information from the data sheets for the SRM6220 and the SRM6320.
|
