DAX6400
900 MHz Discrete/Analog I/O Extender
(the DAX6500 2.4GHz version is also available )

The Data-Linc Group DAX6400 I/O extender offers the ability to transmit discrete and analog signals with robust, industrial wireless technology. This allows wireless I/O communication between the Master and one or more Remotes from a few feet to many miles with applications in many industries. For added convenience, any unit may be configured as Master, Remote, Repeater or Repeater/Remote. This not only simplifies replacement but also reduces the number of units needed for “spare” inventory. A further convenience is the use of pluggable terminal blocks. If a unit needs to be replaced, unplug the terminal block with all its connecting wires and simply plug it into the replacement unit, eliminating the need to reconnect each individual wire.

The DAX6400 offers 12 bit analog resolution for enhanced accuracy and resolution of the analog channels. It therefore provides more precise monitoring and control, allowing data collected at the input to be relayed and reported with greater accuracy to the Master. For confidence in the wireless network’s performance, the DAX is capable of utilizing Data- Linc’s powerful, proprietary LincView^TM OPC RF network diagnostics and management software (see LincView OPC data sheet for information).

Each DAX6400 has a total of 24 independent points— eight discrete inputs and eight discrete outputs, as well as four analog inputs and four analog outputs. The SRM6x20 radio component reliably relays data even in harsh industrial environments. But in the event of a communications failure, the output states of the discrete and analog channels can be configured to retain the last known value or a pre-defined state.

The DAX6400 is ideal for fixed or mobile installations. Its wireless component combines the analog and discrete I/O extender with Data-Linc Group’s SRM industrial grade license-free wireless modems. In addition to the DAX6400 900 MHz (up to 25+ miles, 40 km with LOS) and the DAX6500 2.4 GHz versions, the DAX/EXP expansion non radio Remote is also an option. The result is a simple to implement solution for wireless I/O signal transmission that ensures solid performance and reliability in any RF or wire environment. It is also ARRA compliant.

* American Recovery and Reinvestment Act of 2009

LincView^TM OPC Included Software

Data-Linc Group’s LincView^TM OPC Software provides an optional RF network diagnostics management tool for products with SRM radio components. LincView OPC offers complete RF network monitoring and maintenance from your Master location.

Download a printable pdf (730K) version of this DAX6400 Discrete/Analog I/O Extender data sheet. (Requires Adobe Acrobat Reader to open.)

DAX6400 Specifications

Included
CD. Configuration software, LincView^TM OPC RF network management software, User Manual
Antenna. 0 dB bench test antenna
Other. Programming cable, power supply

Operating ranges
System gain. 138 dB
Distance. 25+ miles (40 km) LOS with omni antennas

Transmitter
RF Output Power. 1 W (30 dBm maximum, (10 programmable steps)
Modulation. Frequency Hopping Spread Spectrum, GFSK
Hop Patterns. 15 (user selectable)
Occupied Bandwidth. 230 KHz
Error Correction. 32 bit CRC
RF Encryption. Substitution Dynamic Key

Reveiver
Sensitivity. -108 dBm @ 10^-6 raw BER
Selectivity. 40 dB @ fc ±230 KHz and 60dB @ fc ±460 KHz

Channel Functions
Analog. 0-20ma, 4-20mA or 0-10 VDC, 24VDC max. loop voltage, 12 bit resolution. Self-powered outputs.
Discrete Input. Dry contact closure
Discrete Output. Open collector (sink to ground), 100mA per channel, 12-24VDC

Connections
Antenna. Standard thread female SMA for optional
external omni directional or yagi antennas.
I/O Discrete and Analog Detachable screw-type terminal blocks
Wire size 12-26 AWG
Power. Detachable three position screw terminal block
Configuration. Standard DB9 RS232 port
EX-Linc. DB9 RS232 or RS485 2-wire

Indicators
General.
P. Power
C. Carrier Detect
I. RF input
O. RF output
Comm Error
Discrete. Activity LED for each discrete I/O

Power
Voltage. 12-28 VDC nominal
Current. 160mA idle, 660 mA peak on transmit

Operating Environment
Temperature. -40 to 167°F (-40 to 75°C)
Humidity. 0 to 95% non-condensing humidity

Enclosure
Standard. 18-gauge steel with mounting flanges 3.0 in x 2.75 x 8.1 in (7.6 x 7 x 20.6 cm)
Optional. DIN rail mounting

Shipping Weight. 1.8 lb (0.82 kg)

DAX (as a Master unit)

Supports to up to 8 DAX Remotes.
Each Master discrete input is replicated on each Remote discrete output.
Compatible with existing DDAA1000 8 bit mode Remote devices (8 bit analog only).
All Master analog inputs replicate on all Remote analog outputs.
Analog outputs are mapped via confi guration software from Remote analog inputs (0 to 4 total)

DAX (as a Remote unit)

Address selected by internal dip switches.
With a DAX Master, a Remote can have addresses 0 to 7 (8 choices).
Compatible with existing DDAA1000 8 bit mode Master devices (8 bit analog only).
Remote analog inputs are mapped via setup to Master analog outputs (0 to 4 total).