CIX6500
2.4 GHz Communication Interface I/O Extender
(the CIX6400 900 MHz version is also available )

Data-Linc Group designed the wireless Communication Interface Extender (CIX) System specifi cally to offer a cost effective, industrial grade automation I/O extender that provides direct PLC connection via communication ports to I/O points- no complicated PLC programming or proprietary software. The easy-to-implement CIX utilizes Data-Linc's proprietary, fi eld-proven SRM wireless technology. These industrial grade wireless products offer simplifi ed, low-labor startup, maintenance and growth for I/O in both the 900 MHz (CIX6400) and the 2.4 GHz (CIX6500) ISM license-free bands. Wired Remote expansion is also available (CIX/EXP).

The Communication Interface Extender system goes beyond standard I/O devices. The "head end" is a dual port CIX6500/M Master with an Ethernet and serial port for connection to a PC or PLC. The Ethernet interface supports Ethernet/IP or Modbus TCP/IP and the serial interface supporting full duplex DF1 or Modbus RTU protocols. The CIX6500/M communicates wirelessly with up to 16 CIX6500/R Remote I/O units to form a single wireless I/O network for seamless protocol integration into your equipment. Protocol communications with the CIX Master is as documented by the equipment manufacturer to utilize Data-Linc's point addressing model.

Each CIX6500/R Remote provides 8 discrete inputs, 8 discrete outputs, 4 analog inputs and 4 analog outputs. A full network with 16 CIX Remotes provides a total of 384 I/O points. Discrete inputs are self-sensing dry contact. Discrete outputs are open collector common emitter (sinking), and the 12 bit resolution analogs can be confi gured for 0-20 ma, 4-20 ma and 0-10 VDC.

Wireless communication is based on Data-Linc's robust and proprietary SRM Smart SpectrumTM FHSS technology. All SRM radio features are available including Repeater, Remote and Repeater/Remote modes. Operation of two or more CIX wireless networks in near proximity and in the same ISM band is supported. LincViewTM OPC real time wireless RF network diagnostics is also supported. The result is extremely robust and reliable I/O communication for both in-plant or in-the-fi eld use (range up to 10 miles with line of sight), even in high noise environments. The CIX system has excellent noise immunity, but should loss of wireless communication occur, each output point can be forced to a specifi ed value or to hold last value, and the communications loss is indicated by a status light and an output bit for event notifi cation. Using Network ID mode permits replacement of any CIX unit without reconfi guring any other CIX unit. All I/O connections are via pluggable terminal blocks to simply initial wiring, and if required, a CIX unit can be replaced without the need to rewire. Each CIX Remote can be wire connected to CIX/EXP expansion unit Remote via RS232 or RS485 wiring. This permits I/O point expansion at or near a CIX6500/R location.

Field confi guration of each CIX unit is straight forward using Data-Linc's confi guration software. CIX6500 Wireless I/O is also backed by Data-Linc Groups extensive background and knowledge of PLC's and was specifi cally designed for PLC communications.

The CIX6500 wireless I/O network is ideal for data acquisition and control applications. The Communication Interface Extender is an excellent option for installations looking toward future growth. Merely add another Remote or another CIX network. Whether an installation is small and requires only a few discrete points or is expanding to multiple networks of discrete and analog I/O, the CIX wireless I/O system can meet the challenge and provide cost-effective reliable solution. It is also ARRA compliant.

* American Recovery and Reinvestment Act of 2009

Download pdf (988K) the printable version of the Data Sheet for the CIX6500 Communication Interface I/O Extender. (Requires Adobe Acrobat Reader to open.)

CIX6500 Specifications

Included
CD. Configuration software, LincView^TM OPC RF network management software, User Manual
Antenna.
0 dB bench test anten
Other. Programming cable, power supply

CIX6500/M & CIX6500/R Radio Component

Operating ranges
System gain. 134 dB
Distance. 10 miles (16 km) LOS with omni antennas

Transmitter
RF Output Power. 500 mW maximum, (10 programmable steps)
Modulation. Frequency Hopping Spread Spectrum, GFSK
Hop Patterns. 15 (user selectable)
Occupied Bandwidth. 230KHz
Error Correction. 32 bit CRC
RF Encryption. Substitution Dynamic Key

Receiver
Sensitivity. -107 dBm @ 10^-4 raw BER
Selectivity. 40 dB @ fc ±230 KHz and 60dB @ fc ±460 KHz

Operating Environment
Standard. 32°0 to 140° F (0° to 60° C)
Humidity. 0 to 95% non-condensing humidity

CIX6500/M Master

Connections
Antenna. Standard thread female SMA for optional external omni directional or yagi antennas
external omni directional or yagi antennas.
Ethernet. 2 RJ45s, 10Base-T (1 straight, 1 crossed)
Serial. DB9 or RS485 2-wire
Power Detachable 3-position screw terminal block

Indicators
LAN.
L. LAN connection
A. LAN activity
RF.
P. Power
L. RF Link
O. RF output
I. RF input
Mode. M1, M2

Power
Voltage. 12-28 VDC nominal
Current. 160mA idle, 660mA peak on transmit

Operating Environment
Temperature. -40 to 167°F (-40 to 75°C)
Humidity. 0 to 95% non-condensing

Enclosure. 18 gauge steel
Standard. 8-gauge steel with mounting flanges
2.35 X 3.75 X 8.1 in. (6 X 9.5 X 20.6 cm)
Optional. DIN rail mounting

Shipping Weight. 1.8 lb (0.82 kg)

CIX6500/R Remote

Channel Functions
Analog. 0-20ma, 4-20mA or 0-10 VDC, 24VDC max. loop voltage, 12 bit resolution. Self-powered outputs.
Discrete Input. Dry contact closure
Discrete Output. Open collector (sink to ground), 100mA per channel, 12-24VDC

Connections
Antenna. Standard thread female SMA for optional external omni directional or yagi antennas
I/O Discrete and Analog. Detachable screw-type terminal blocks Wire size 12-26 AWG
Power. Detachable three position screw terminal block
Configuration port. Standard DB9 RS232 port
EX-Linc. DB9 RS232 or RS485 2-wire

Indicators
General.
P. Power
C. Carrier Detect
O. RF output
I. RF input
Comm Error
Discrete. Activity LED for each discrete I/O

Power
Voltage. 12-28 VDC nominal
Current. 160mA idle, 660mA peak on transmit

Operating Environment
Temperature. -40 to 167°F (-40 to 75°C)
Humidity. 0 to 95% non-condensing humidity

Enclosure
Standard. 18-gauge steel with mounting flanges
3.0 in x 2.75 x 8.1 in (7.6 x 7 x 20.6 cm)
Optional. DIN rail mounting

Shipping Weight 1.8 lb (0.82 kg)